PA6 Abrasive nylon Filament
PA6 abrasive nylon filaments are made of nylon PA6 as carrier and 36~1000 mesh abrasive particles such as silicon carbide, alumina, and diamond grinding dust. The hot melts from the above are extruded to form abrasive nylon filaments that are strong and heat resistant under wet or dry conditions. Main applications are devices for workplace deburring, grinding, and polishing of the surfaces of steel, stone, and other materials. Also useful for general surface treatment.
Raw material: PA6
Grit: silicon carbide,aluminum oxide, diamond
Grit size: 36#,46#,60#,80#,120#,180#,240#,320#,500#,600#,800#,1000#
Grit loading: 15%～30%
Color: natural,grey,white,red,orange,blue and so on
Binding diameter: 45～51mm
1.Nylon 6 abrasive nylon filament is the cheapest among PA612,PA610.
2.Soft with lower grinding effect.
3.Hiher water absorption.
4.Better bend recovery,
6.Higher impact resistance.
8.Heat Distortion Temperature:190℃,
So Nylon 6 abrasive filament is break-resistant and therefore is often used for dry as well as soft grinding work under high wheel speed and high pressure, Nylon 6 abrasive filament is suitable for short-time surface finishing.